Is tungsten carbide spray wear-resistant?

Carbon tungsten spray coating is wear-resistant. Generally speaking, the higher the Mohs hardness of the material, the better the wear resistance. If there is an oxidation error, its Mohs hardness is 7. It has excellent physical and chemical properties, such as high hardness, high strength, high toughness, high wear resistance, and chemical corrosion resistance. The Mohs hardness of tungsten carbide is 8.5-9, so its wear resistance is very good.

1、 Characteristics of tungsten carbide spraying

Tungsten carbide spraying can save material and spare parts inventory, greatly reduce downtime, and improve economic efficiency, as the workpieces to be sprayed have excellent performance.

2. Tungsten carbide spraying not only saves a lot of materials, but also enables parts to fully exert their excellent performance after conventional and special treatments.

3. Tungsten carbide spraying can make the workpiece have excellent wear resistance Corrosion resistance heat-resisting. The insulation performance, as well as the basic insulation properties that were originally unavailable, can extend the service life by several times to tens of times.

4. Tungsten carbide spraying can be used for thermal spraying processes. According to the different requirements of surface properties of material parts, corresponding materials can be used to significantly change the surface properties of parts sprayed with tungsten carbide.

2、 What should be paid attention to when spraying tungsten carbide

1. After filling the oxygen cylinder and pressure regulator, slowly open the oxygen valve and check whether the connection between the oxygen cylinder and pressure regulator is leaking, and whether the indicator light is flexible. When opening the oxygen valve, the head should not face the pressure regulator, but should stand on the surface or back of the pressure regulator When spraying tungsten carbide for leak detection, fireworks or open flames must not be used Soap water inspection, check for leaks before use.

2. The nut of the oxygen pressure gauge should be screwed onto at least 6-8 buttons on the nozzle of the oxygen cylinder. The tungsten carbide spray joint should be tightened and the pressure gauge adjustment screw should be loosened to ensure the display of tungsten carbide spraying effect and performance.

3. When transporting oxygen or acetylene cylinders, it is important to ensure that the bottleneck is facing upwards and that the protective cap switches at the inlet and outlet are properly packaged. When using bottle caps, the protective cap on the bottleneck should be placed in a suitable and reliable location When turning the lid, only hand or wrench can be used to rotate the lid Do not strike with a metal hammer to prevent accidents on Mars.

4. Do not put oxygen cylinders, acetylene cylinders, and other flammable gas cylinders together. Spray flammable materials, grease, oil stains, tungsten carbide and other dirt items, and do not place them together with oxygen cylinders, otherwise it is prone to combustion and explosion.

Before installing the pressure regulator, the tungsten carbide spray coated steel cylinder should be slightly opened with the oxygen valve blown dry to prevent dust and garbage from blocking the pressure regulator and causing accidents.